X25AM Management Programming Manual

Commands and Responses
X25AM Management Programming Manual—528037-001
6-103
RESETSTATS Command
ZUA-RECV
contains the total number of UA frames received.
ZDM-SENT
contains the total number of DM frames sent.
ZDM-RECV
contains the total number of DM frames received.
ZCLIP-DRV
is a structure that contains error statistics that are meaningful only for 6100
X25AM lines. It consists of the following fields:
ZFCS-ERR
contains the number of frames received with errors in the Frame-Check
Sequence (FCS).
ZT1-TIMEOUT
contains the number of frames that timed out before acknowledgment was
received.
ZMODEM-ERR
contains the number of modem-signal handshaking errors. This counter
does not relate to file-system error 140, which can be returned due to
modem errors, calls being cleared or denied, and so on.
ZBAD-ADDR-ERR
contains the number of good frames received with bad address fields.
ZBAD-LEN-ERR
contains the number of good frames received with an invalid length for the
LAPB protocol.
ZRECV-ABORTS
contains the number of ABORT frames received.
ZOVERRUN-ERR
contains the number of receiver overruns. This condition generally
indicates that the line is faster than the X.25 CLIP can handle.
ZNO-BUF-ERR
contains the number of buffer failures in the level-2 receive queue.