X25AM Management Programming Manual

Commands and Responses
X25AM Management Programming Manual—528037-001
6-132
STATUS Command
ZBPID
contains the backup process ID of the X25AM subsystem.
ZTOTAL-SU-NUM
contains the total number of subdevices for the line.
ZLAST-ERR
contains the error number of the last detected error on the line.
ZCLIP-LINE
is a structure that contains information that is meaningful only for 6100 or 6105
X25AM lines. It consists of the following fields:
ZDEBUG
indicates the state of the DEBUG attribute. This field can have the
following values:
ZPATH
indicates the CIU path that is currently being used. This field can have the
following values:
ZCU-PRIM
contains the primary CIU path (for 6100 X25AM lines) or controller
address.
ZCU-BKUP
contains the backup CIU path. If the line is not a 6100 X25AM line, this
value is 0 (zero).
ZCTS
indicates the status of the modem signal Clear to Send on 6100 X25AM
lines. This field can have the following values:
If the line is not a 6100 X25AM line, this field always contains ZSPI-VAL-
FALSE.
ZSPI-VAL-TRUE The DEBUG attribute is true.
ZSPI-VAL-FALSE The DEBUG attribute is false.
ZCOM-VAL-PATH-A Path A is being used.
ZCOM-VAL-PATH-B Path B is being used.
ZSPI-VAL-TRUE The signal is ON.
ZSPI-VAL-FALSE The signal is OFF.