X25AM Management Programming Manual

Commands and Responses
X25AM Management Programming Manual—528037-001
6-133
STATUS Command
ZDCD
indicates the status of the modem signal Carrier Detect on 6100 X25AM
lines. This field can have the following values:
If the line is not a 6100 X25AM line, this field always contains ZSPI-VAL-
FALSE.
ZDSR
indicates the status of the modem signal Data Set Ready on 6100 X25AM
lines. This field can have the following values:
If the line is not a 6100 X25AM line, this field always contains ZSPI-VAL-
FALSE.
ZPCHANNEL
contains the primary channel number.
ZPCONTROL
contains the primary controller number.
ZPUNIT
contains the primary unit number.
ZBCHANNEL
contains the backup channel number.
ZBCONTROL
contains the backup controller number.
ZBUNIT
contains the backup unit number.
ZX25-MAP-STATUS-SU
is present if the token ZCOM-TKN-OBJTYPE contains the value ZCOM-OBJ-SU. It
has the token number ZX25-TNM-STATUS-SU and the DDL definition ZX25-DDL-
STATUS-SU. This token contains the following fields:
ZSPI-VAL-TRUE The signal is ON.
ZSPI-VAL-FALSE The signal is OFF.
ZSPI-VAL-TRUE The signal is ON.
ZSPI-VAL-FALSE The signal is OFF.