X25AM Management Programming Manual

Introduction
X25AM Management Programming Manual—528037-001
1-2
Relationship with Other Subsystems
•
Clear virtual circuits.
•
Obtain statistics about the execution history of lines and subdevices.
•
Reinitialize the counters used to save statistics for lines and subdevices.
•
Obtain the names of lines and subdevices known to the subsystem.
•
Trace the actions of lines.
Relationship with Other Subsystems
No other subsystems control the objects that the X25AM subsystem controls.
Architecture of the X25AM Subsystem
The X25AM subsystem consists of one or more line-handler processes. Figure 1-1
illustrates the architecture of the X25AM subsystem and the various interfaces to the
subsystem.
You can communicate with the X25AM subsystem through both interactive and
programmatic interfaces. These are the interactive interfaces to the X25AM
subsystem:
•
The Subsystem Control Facility (SCF), which can be used to configure, control,
and collect information from the X25AM subsystem.
Figure 1-1. Architecture of the X25AM Subsystem
CUP
CMI
PUP
FUP
Line-
Handler
Processes
SCP
SCF
EMS
Interactive
Interfaces
X25AM Subsystem
Programmatic
Interfaces
VST0101.vsd