X25AM Management Programming Manual

Event Management
X25AM Management Programming Manual—528037-001
7-12
4: ZX25-EVT-DEV-ERROR
If modem loss was detected, bits 8 through 15 of the status word indicate modem
status as follows:
If no modem loss was detected, bits 8 through 15 of the status word have the following
meanings:
The value param1 in the message text contains a mask that designates which bits of
dev-status are allowed to be equal to 1.
Recovery. If the information given by the values dev-status and param1 in the
message text indicates a problem with HP hardware, contact your HP representative.
Bit Meaning
. 8 Data set ready (inverted)
. 9 Carrier detect (inverted)
. 10 Clear to send (inverted)
. 11 Transmit overrun
. 12 RS-422
. 13 Maintenance mode
. 14 Request to send
. 15 Data terminal ready
Bit Meaning (Write Unit) Meaning (Read Unit)
. 8 Receiver error
. 9 Assembled bit count, bit 0 (ABC. 0)
. 10 ABC. 1
. 11 Ending state count ABC. 2
. 12 Receiver overrun error
. 13 Abort/Go-Ahead character detected
. 14 Receiver end-of-message
. 15 0
Bit Meaning (Autopoll) Meaning (Modem Control)
. 8 0 Data set ready (inverted)
. 9 0 Carrier detect (inverted)
. 10 0 Clear to send (inverted)
. 11 0 Transmit overrun
. 12 0 RS-422
. 13 0 Maintenance mode
. 14 End of poll list Request to send
. 15 End of poll Data terminal ready