X25AM Management Programming Manual

Event Management
X25AM Management Programming Manual—528037-001
7-26
90: ZX25-EVT-PROCESS-ABEND
ZEMS-TKN-EMPHASIS
contains the value ZSPI-VAL-TRUE, indicating that this event is a critical event.
This token is described in the EMS Manual.
ZEMS-TKN-CONSOLE-PRINT
contains the value ZSPI-VAL-TRUE. This token is described in the EMS Manual.
(ZEMS-TKN-) CPU, CRTPID, GENTIME, LOGTIME, PIN, SYSTEM, and
USERID
are standard EMS tokens described in the EMS Manual.
In the message text, ldev corresponds to the value of ZEMS-TKN-LDEV. The value
nnnnn indicates the problem, and it can have the following values:
Cause. A missing, incorrect, or inconsistent SYSGEN parameter has been detected.
Effect. The X25AM process deletes itself.
Recovery. Correct the problem indicated by the value nnnnn in the text message and
run SYSGEN again, or reconfigure the process into the system by using COUP.
If nnnnn has the value 40, contact your HP representative.
01 The X25AM subsystem is not licensed to run in the processor.
02-03 There is a SYSGEN or COUP error.
10-19 There is insufficient memory (stack space).
20-29 There is insufficient memory (I/O space or extended segment).
40 There is an internal error.