X25AM Management Programming Manual

Event Management
X25AM Management Programming Manual—528037-001
7-30
95: ZX25-EVT-ACTIVEPATH-ISSUED
95: ZX25-EVT-ACTIVEPATH-ISSUED
The status of the activate path request issued by the line.
ZX25-TKN-REQ-STATUS
represents whether the activate path request is successful. This token has two
values.
ZX25-TKN-PATH-NAME
represents the path used to issue the activate path request. This token has two
values.
ZCOM-TKN-NEW-CPU
represents the processor used when the activate path request is issued.
In the message text, cpuno indicates the processor number on which the activate path
request is issued.
Cause. A START LINE command is issued, or a line tries to recover from any type of
failure.
Effect. Indicates the status of the activate path request.
Recovery. Informational message only; no corrective action is needed.
Tokens
ZX25-TKN-REQ-STATUS token type ZSPI-TYP-ENUM
ZX25-TKN-PATH-NAME token type ZSPI-TYP-ENUM
ZCOM-TKN-NEW-CPU token type ZSPI-TYP-
Event-Message Text
X25 LINE : ACTIVATE PATH REQUEST IS
{"SUCCESSFULLY ISSUED" | "FAILED"}
On PATH {A | B} From CPU cpuno
ZX25-VAL-ISSUED The activate path request is successful.
ZX25-VAL-FAILED The activate path request failed.
ZX25-VAL-PATHA Path A
ZX25-VAL-PATHB Path B