X25AM Management Programming Manual

Event Management
X25AM Management Programming Manual—528037-001
7-52
157: ZX25-EVT-CSS-FRAME-ERROR
ZEMS-TKN-EMPHASIS
contains the value ZSPI-VAL-TRUE, indicating that this event is a critical event.
This token is described in the EMS Manual.
ZEMS-TKN-CONSOLE-PRINT
contains the value ZSPI-VAL-TRUE. This token is described in the EMS Manual.
(ZEMS-TKN-) CPU, CRTPID, GENTIME, LOGTIME, PIN, SYSTEM, and USERID
are standard EMS tokens described in the EMS Manual.
In the message text, ldev corresponds to the value of ZEMS-TKN-LDEV. The values
ccu, path, nn, param1, and param2 do not correspond to the values of tokens in the
event message.
The value nn indicates the reason for the error, and it can have the following values:
The value param1 in the text message contains the CIU-to-LIU Bus (CLB) frames A
and C, and param2 contains the CLB frames T and S.
Cause. An invalid frame was received. It is normal for this event to occur during a path
switch.
Effect. Generally, the system recovers automatically.
Recovery. If this event occurs other than during a path switch, note the values of nn,
param1, and param2 in the text message, and contact your HP representative.
0 Unexpected frame
1 Invalid A field (address)
2 Invalid C field (control)
3 Invalid T field (type)
4 Invalid S field (sequence number)
5 Invalid function
6 Not the expected response to the command
7 Type-6 error message received from CLIP
8 Not the expected multiframe type received