X25AM Management Programming Manual

Elements for SPI Messages for the X25AM
Subsystem
X25AM Management Programming Manual—528037-001
3-3
Command Numbers
Command Numbers
In the X25AM subsystem, command numbers are represented by symbolic names of
the form ZCOM-CMD- name, where name identifies the command.
The X25AM subsystem supports the following commands:
These commands are described in Section 6, Commands and Responses.
Object Types
In addition to the object-type header token found in all commands and responses, most
X25AM response records contain an object-type token that describes the object the
response record relates to. In the X25AM subsystem, object types are represented by
symbolic names of the form ZCOM-OBJ- name, where name identifies the object type.
The X25AM subsystem supports the following object types:
The kinds of objects the X25AM subsystem manages are described in Section 1,
Introduction. The object types supported by the X25AM subsystem are described in
Section 5, Common Definitions.
Object Names
Most X25AM commands and responses contain object-name tokens that, when
combined with the object-type information, designate which objects are to be or were
affected by the command.
In the management-programming interface to the X25AM subsystem, an object name
for a line or process consists of a dollar sign ($) followed by from one to seven
alphanumeric characters; the first character is always a letter. An example of a valid
line or process name is "$LN01".
An object name for an X25AM subdevice consists of a pound sign (#) followed by from
one to seven alphanumeric characters; the first character is always a letter. In addition,
ABORT LISTOBJECTS
ADD RESETSTATS
ALLOWOPENS START
ALTER STATISTICS
DELETE STATUS
DISCONNECT STOP
FORBIDOPENS SWITCH
GETVERSION TRACE
INFO
LINE PROCESS
NULL SU