X25AM Management Programming Manual

Commands and Responses
X25AM Management Programming Manual—528037-001
6-19
ADD Command
ZBCUG
specifies the bilateral closed user group ID sent in every call-request packet.
The range is 0 through 9999.
RESET means no BCUG is assigned and BCUG has the value -1.
ZRPOA
specifies the Recognized Private Operating Agency (RPOA) transit network(s)
in the facility field of a call-request packet. An RPOA transit network is
indicated by the Data Network Identification Code (DNIC), which is an integer
in the range 0 through 9999.
ZRPOA-DNIC-CNT
specifies the number of DNICs listed in the ZRPOA field. The range is 0
through 7.
ZTRANSIT-DELAY
specifies the transit delay in the facility field of a call-request packet. The value
is in TIMESTAMP format with a range of 0 through 6553 hundredths of a
second.
ZCOM-TKN-OBJNAME
is an object-name token that contains the name of the subdevice to be added. This
token must be present in the command, and duplicate occurrences are not
allowed. ZCOM-TKN-OBJNAME is described in Section 5, Common Definitions.
ZCOM-TKN-CMD-TIMEOUT and ZCOM-MAP-REQID
are standard data communications tokens that are described in the SPI Common
Extensions Manual. Duplicate occurrences of these tokens are not allowed.
(ZSPI-TKN-) MAXRESP, RESPONSE-TYPE, ALLOW-TYPE, and COMMENT
are standard SPI tokens described in the SPI Programming Manual. With the
exception of ZSPI-TKN-COMMENT, duplicate occurrences of these tokens are not
allowed.
Tokens in Response Buffer
ZSPI-TKN-DATALIST
is a standard SPI data list, as described in the SPI Programming Manual. The list
ends with the token ZSPI-TKN-ENDLIST.