X25AM Management Programming Manual

Commands and Responses
X25AM Management Programming Manual—528037-001
6-28
ALTER LINE Command
attribute corresponding to that field. If no value is assigned to a field, the
corresponding attribute is not altered.
ZX25-MAP-ALTER-LINE contains the following fields:
ZNETID
specifies the X.25 Public Data Network (PDN) that the X25AM subsystem is
communicating with. This value is used to establish the addressing
conventions required by the network. This field is required and must be
assigned one of the following values:
ZX25-VAL-NETID-DATANET The addressing conventions for the DATANET
network are used. This value corresponds to the
SYSGEN modifier DATANET.
ZX25-VAL-NETID-DATAPAC The addressing conventions for the DATAPAC
network are used. This value corresponds to the
SYSGEN modifier DATAPAC.
ZX25-VAL-NETID-DATEXP The addressing conventions for the DATEX-P
network are used. This value corresponds to the
SYSGEN modifier DATEXP.
ZX25-VAL-NETID-DDXP The addressing conventions for the DDXP (NTT)
network are used. This value corresponds to the
SYSGEN modifiers DDXP and NTT.
ZX25-VAL-NETID-PSS The addressing conventions for the PSS network
are used. This value corresponds to the SYSGEN
modifier PSS.
ZX25-VAL-NETID-TELENET The addressing conventions for the TELENET
network are used. This value corresponds to the
SYSGEN modifier TELENET.
ZX25-VAL-NETID-TRANSPAC The addressing conventions for the TRANSPAC
network are used. This value corresponds to the
SYSGEN modifier TRANSPAC.
ZX25-VAL-NETID-TYMNET The addressing conventions for the TYMNET
network are used. This value corresponds to the
SYSGEN modifier TYMNET.
ZX25-VAL-NETID-X25 The addressing conventions of the generic netid
X25 are used. This value corresponds to the
SYSGEN modifier X25.
ZX25-VAL-NETID-X25NP The addressing conventions of the generic netid
X25NP are used. This value corresponds to the
SYSGEN modifier X25NP.