X25AM Programming Manual

PTP Applications
X25AM Programming Manual—527201-001
3-25
PTP Programming Tasks
Setting subdevice-dependent functions
•
SETMODE 30:
Set the NOWAIT completion order for subdevice file-system operations.
•
SETMODE 31:
Set the data-exchange mode and request address pass-through.
•
SETMODE 32:
Set the Call Setup parameters.
Reinitializing SETMODE and SETPARAM values
Use SETMODE 28 to reset the parameter values set by the SETMODE and
SETPARAM procedure to the values configured for the subdevice.
Retrieving Call Request Information
Use the following functions to retrieve call information.
•
SETPARAM 1
Get the remote DTE address.
•
SETPARAM 7
Get the configured Closed User Group (CUG) ID.
•
SETPARAM 8
Get the protocol identifier.
•
SETPARAM 29
Get the local NSAP address.
•
SETPARAM 30
Get the remote NSAP address.
•
SETPARAM 31
Get the local NSAP address type.
•
SETPARAM 32
Get the remote NSAP address type.
•
SETPARAM 33
Get the Closed User Group type (CUGTYPE).
•
SETPARAM 34