Manualshelf

XYGATE Access Control Reference Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series
281282283284285286287288289290
XYGATE
®
Access Control Reference Manual
Appendix E: XAC Host Macros
XYPRO Technology Corporation 254 Proprietary and Confidential
If desired, the TACL & can be used to separate command lines for legibility. Or, in a
TACL macro, use brackets to enclose all the selection criteria and list them one per
line as shown in the following example:
Example:
$VIK XYGATEAC 121> XYGATEAC_AUDIT_REPORT &
$VIK XYGATEAC 121> & 2013-09-04 &
$VIK XYGATEAC 121> & 00:00 &
$VIK XYGATEAC 121> & 2013-09-04 &
$VIK XYGATEAC 121> & 23:59 &
$VIK XYGATEAC 121> & 232,* &
$VIK XYGATEAC 121> & * &
$VIK XYGATEAC 121> & N &
$VIK XYGATEAC 121> & * &
$VIK XYGATEAC 121> & * &
$VIK XYGATEAC 121> & Y &
$VIK XYGATEAC 121> & $VIK.XYLOGS.XAC &
$VIK XYGATEAC 121> & $S.#XAC.REPORT &
$VIK XYGATEAC 121> & SESSION &
$VIK XYGATEAC 121> & 0 &
$VIK XYGATEAC 121> & XAC_Report_Example &
$VIK XYGATEAC 121> & * &
$VIK XYGATEAC 121> & * &
$VIK XYGATEAC 121> & * &
$VIK XYGATEAC 121> & * &
$VIK XYGATEAC 121> & 132 &
$VIK XYGATEAC 121> & 59
FILE NAME LEVEL READ RECORDS READ POSITIONS
$VIK.XYLOGS.XAC 1 171 1
007,00,00721 BEGIN(09/05/13 - 00:04:56:92) END(09/05/13 - 00:04:57:06)
STRATEGY COST = 2
** END-OF-ENFORM-RUN **
$VIK XYGATEAC 122>
As shown in the TACL macro REPMAC, it uses the brackets to enclose all the
selection criteria,
If desired, any XAC user who wants to develop customer-specific reports can use
REPMAC which is a sample located in the XAC install volume as shown in the
following example.