XYGATE Access Control Reference Manual

XYGATE
®
Access Control Reference Manual
Chapter 1. Installing XAC
XYPRO Technology Corporation 2 Proprietary and Confidential
User-Defined Configuration Values Required for AutoInstall
You have the option of specifying the user-defined values shown in Table 1 when
using the AutoInstall script. If you do not specify a value, AutoInstall will use default
values given in Table 2. If necessary, contact your system manager for input to these
questions.
Table 1: User-Defined Input Values for AutoInstall
Provide the following Information for the AutoInstall Script Value
A unique $VOL.SVOL for the installed software for XAC (it is
recommended that XAC be installed on $SYSTEM)
A unique $VOL.SVOL for the installed software for XTR
A port number between 1025-32000 for the TCP/IP LISTNER
process
Additional users or aliases that need access to run XYGATE
GUIs (optional)
AutoInstall Default Configuration Values
If necessary, contact your system manager for any conflicts or considerations. You can
change these values after the AutoInstall script is completed.
Table 2: Defaults for User-Defined Values
Configuration Settings Default or User-Defined Value
$VOL references for locating all files Current $VOL | <user-value>
A unique SUBVOL for the installed software for XAC XYGATEAC | <user-value>
A unique SUBVOL for the installed software for XTR XYGATETR | <user-value>
A port number between 1025-32000 for the TCP/IP
LISTNER process
1120 | <user-value>
Additional users or aliases that need access to run
XYGATE GUIs (optional)
Owner of script plus SUPER.SUPER
plus additional <user-values>