XYGATE Access Control Reference Manual

XYGATE
®
Access Control Reference Manual
Appendix G: XAC Error Messages
XYPRO Technology Corporation 280 Proprietary and Confidential
Error Message Description
USER_AUTHENTICATE_ failed,
reason #####,#####
This message is printed if errors have been found after DBSO has finished
checking for syntax in the ACCONF and ACACL files.
XAC - <CMON name> not available,
continuing
The NSK procedure USER_AUTHENTICATE_ failed for the reason
specified. Please call XYPRO Technology for assistance.
XAC - <CMON name> not
responding, continuing
The $CMON process named in <CMON name> is not available, but
XYGATEAC will continue processing.
XAC - <CMON name> timed out,
continuing
The $CMON process named in <CMON name> was previously opened, but
now a write to it caused an error. XYGATEAC will continue processing.
XAC - <Timeout> The $CMON process named in <CMON name> was previously opened, but
now a write to it has timed out. XYGATEAC will continue processing.
XAC – ACACL syntax error at line ## The process exceeded the wait time limit defined with the TIMEOUT
keyword in the ACACL entry.
XAC – ACACL syntax error at line ##
- <Command Name> exceeds 32
characters by ## characters
This error message can be caused by the following conditions:
1) Too many numbers – exceeded limit of numbers that can be entered.
2) An illegal character is present in an argument that is defined to be a
number.
3) A keyword is present that requires a numeric argument and no number
is present.
4) The INPUT keyword was found but no argument was specified.
5) The ALIAS keyword was found but no arguments were specified.
6) A MAP_C_FKEY or MAP_B_FKEY entry occurred without any
arguments; both the ORIGINAL key and MAP-TO key to must be
specified.
7) The PROMPT keyword was found but no argument was specified.
8) The argument to the keyword used in this line is incorrect; it must be
either ON or OFF.
9) The argument to the FILE_SECURITY keyword must be a valid four
character security vector.
XAC – ACACL syntax error at line ##
- ACLGROUP <name> has an invalid
ACL - <token>
The maximum length of the Command Name is 32 characters.
XAC – ACACL syntax error at line ##
- ALIAS error
The ACLGROUP named has an invalid USER specified in its definition.
XAC – ACACL syntax error at line ##
- Bad parse mode
The correct number of quotation marks were not present in the arguments to
the ALIAS keyword. The syntax is ALIAS "original command" "destination
command".
XAC – ACACL syntax error at line ##
- Cannot use
START_LOGGED_OFF keyword
and START_LOGGED_ON keyword
at the same time
Your command cannot be parsed. Please call XYPRO Technology for
assistance.
XAC – ACACL syntax error at line ##
- Cannot use START_LOGGED_ON
keyword and
START_LOGGED_OFF keyword at
the same time
If you have specified the START_LOGGED_ON keyword, you cannot
subsequently specify the START_LOGGED_OFF keyword.