XYGATE Access Control Reference Manual

XYGATE
®
Access Control Reference Manual
Appendix G: XAC Error Messages
XYPRO Technology Corporation 286 Proprietary and Confidential
Error Message Description
XAC – Command has syntax error in
ACACL file
The name of a command in the ACACL file must be less than or equal to 32
characters.
XAC – Command is not allowed
<command>
There is a syntax error in the text of this command in the ACACL file.
XAC – Command not found The command is not permitted because it has been prohibited using
ALLOWCMD and DENYCMD.
XAC – Could not complete I/O to DB
server
The specified command cannot be found in the ACACL Command Entry file.
XAC – Could not initiate I/O to DB
server
Some error occurred on the I/O to the DB server. Please check $0 for error
messages from the DB server.
XAC – Could not open DB server The DBSO database server could not be accessed. This can be caused
when the system is especially busy – XYGATEAC will wait two minutes for
DBSO to respond and if that period is exceeded, XYGATEAC will terminate
with this error. Please retry the command.
XAC – Database server could not be
started
An error occurred trying to open the database server (DBSO) using the
name assigned to it when XYGATEAC was installed. Ensure that the
database server process is executing the correct object file.
XAC – Database server object
filename wrong
The DBSO database server could not be started. Check the system console
($0) for messages from DBSO.
XAC – DB server version mismatch A check is done of the object file running with the name assigned to the
database server at XYGATEAC installation. If the names do not match, this
error is generated.
XAC – Error #### opening
<filename>
The database server DBSO is at a different revision level than XYGATEAC.
Ensure that both programs are at the same revision level.
XAC – Error #### stopping <process
name>, process will be left running
The IN file could not be opened.
This error will be written to the home terminal if possible and to the console if
the RESTART keyword has been set on the command.
XAC – Error ##### opening
<filename>
The process could not be stopped. The specified error occurred while trying
to stop it. The process is still running.
XAC – error ##### opening home
terminal <filename>
The OUT file could not be opened.
This error will be written to the home terminal if possible and to the console if
the RESTART keyword has been set on the command.
XAC – Error ##### opening initial
process
The device named in <filename> cannot be opened.
XAC – Error building EMS buffer in
COMMANDAUDIT.
XYGATEAC received the error specified opening the process XYGATEAC
just started.
XAC – Error building EMS message
for AUDIT
One of the command audit files defined for XYGATEAC is $0 with the EMS
keyword set. When XYGATEAC attempted to build a command audit record
in EMS format, an error occurred.
XAC – Error opening new out file,
retaining existing out file
One of the invoke audit files defined for XYGATEAC is $0 with the EMS
keyword set. When XYGATEAC attempted to build an invoke audit message
in EMS format, an error occurred.
XAC – FKEY <keyname> is not
allowed
The filename specified in the >OUT command could not be opened.