XYGATE Access Control Reference Manual

XYGATE
®
Access Control Reference Manual
Appendix G: XAC Error Messages
XYPRO Technology Corporation 288 Proprietary and Confidential
Error Message Description
XAC – process_create_ complete
error #####:#####
XYGATEAC could not start the object file because the object file is secured
so that the user specified in the USER keyword of the ACACL Command
entry cannot execute the object file.
XAC – Process_create_ error
#####:##### <filename>
<XYGATEAC’s process name>.#IN
The error specified occurred when XYGATEAC attempted to start the
process
XAC – Receive request queue
underflow.
XYGATEAC attempted to start an object file. The object file did not start
because of the error number specified.
XAC – Retrying error ## on
<filename>
Internal data structures have been corrupted. Please call XYPRO
Technology for assistance.
XAC – Retrying error 12 on
<filename>
The banner stored in <filename> cannot be accessed. XYGATEAC is
retrying the operation. Correct the problem that is preventing XYGATEAC’s
access to the banner file and execution of XYGATEAC will continue.
XAC – Running <filename> as user
<user name>
The file to OBEY is currently open by another process. Close the file and
XAC will continue execution.
XAC – Security violation stopping
<process name>, process will be left
running
This message is displayed when the object file specified in the >RUN
command is successfully started.
XAC - Stopping due to error ## The process could not be stopped because of a security error. The process
is still running.
XAC - Stopping due to modem
disconnect
The STOPONERROR keyword is present in the ACACL entry and this error
is one on the STOPONERROR list, so the process will be stopped.
XAC – System not available Error 140 (modem disconnect) was encountered, so the session will be
terminated.
XAC – Terminating because no audit
files are available.
The system named in the >RUN or >X command is not available.
XAC – Trusted ancestor not found,
originating node cannot be
determined
STOPONAUDITERROR is set and there are no audit files are available.
XAC – Unable to display banner,
error ### on <filename>
XYGATEAC cannot find an authorized ancestor.
XAC – Unknown io type #### XYGATEAC cannot access <filename>. The banner will not be displayed.
XAC – Unknown p_io_type An operation of a type that XYGATEAC cannot handle was received. Please
call XYPRO Technology for assistance.
XAC – Usage of ‘IN <filename’ is not
allowed
The error specified occurred on the process startup. Please call XYPRO
Technology for assistance.
XAC – Write of assign message
failed, error #####
The RUNCHECK keyword is set in the ACACL Command entry.
XAC – Write of param message
failed, error #####
XYGATEAC could not write the ASSIGN message to the process to be
started because the error specified occurred.
XAC – Write of startup message
failed, error #####
XYGATEAC could not write the PARAM message to the process to be
started because the error specified occurred.
XAC – You are not allowed to
execute this command
XYGATEAC could not write the STARTUP message to the process to be
started because the error specified occurred.