XYGATE Access Control Reference Manual

XYGATE
®
Access Control Reference Manual
Chapter 1. Installing XAC
XYPRO Technology Corporation 10 Proprietary and Confidential
Are you ready to continue <Y/N>? Y
Establishing product locations ...
Product locations established.
Performing verifications ...
Verifications complete.
Installing products:
Install of products complete.
Performing products syntax check ...
Products syntax check complete.
Verifying XAC is listed in XTR TRACL file ...
Done verifying XAC is listed in XTR TRACL file.
XYGATE GUIs use a LISTNER process to connect to the host.
You may choose to have a XYGATE LISTNER started now.
WARNING: The XYGATE LISTNER is intended for testing your XYGATE/TR
configuration. This XYGATE LISTNER process may disappear. To assign
a permanent LISTNER, add the following to $SYSTEM.ZTCPIP.PORTCONF
and restart the HP LISTNER:
The port connection for the GUI/PC modules can be permanently set up to the
system’s PORTCONF file using the following information. If the port is defined in this
manner, it will be restarted each time the system is cold-loaded or TCP/IP is re-started.
1121 $VOL.XYGATETR.XYGATETR -server
If this is a new install, you will be asked to start the LISTNER process for connection
from the PC/GUI products. Starting the LISTNER is not a requirement for the server
portion of the XAC product. It may be started at anytime. If started now, it will bind
itself to the port number you previously entered in the script.
Would you like to start the XYGATE LISTNER now <Y/N>? Y
The GUI/PC modules will not be able to connect without a LISTNER set up via this
script or via the PORTCONF. Refer to the GUI Product User Guides for more
information on LISTNERs.
WARNING: The start listner macro is intended for testing your
XYGATE/TR configuration. For production usage, you must use the
HP Listner by making entries in your PORTCONF.
XYLISTEN has bound to port : 1121
Listner process $Y4LA started.
Taking inventory ...
Taking inventory complete.
Validating the installation ...
A final status screen will display the current XAC environment.
Product Distribution Version Installed Version
-------- -------------------- -----------------
XAC 5.65 5.65
XTR 1.56 1.56
Listner is running and listening on port 1121.