XYGATE Access Control Reference Manual

XYGATE

Access Control Reference Manual

Chapter 1. Installing XAC

XYPRO Technology Corporation 27 Proprietary and Confidential

You can also check your current license using the XAC_VERSION macro described in

Appendix E23: on page 273 as shown in the abbreviated output below.

Example:

$VNEO1 XYGATEAC 62> xac_version

This is version 5.75 of XYGATEAC

XYPRO license check XYPRO \N1 20991231

XYPRO P06-0026 20991231 \ALL(999) \ENCRYPT(003)

--BEGIN XYPRO SIGNATURE

PUBLIC-KEY:

LICENSE-CREATE: 19991217-140450

CUSTOMER-NAME: XYPRO

CUSTOMER-NUMBER: 0026

PRODUCT: XYGATE-AC 20991231

NODE: \ALL 0999 *

NODE: \ENCRYPT 0003 *

License good

VPROC - T9617H01 - (01 FEB 2009) SYSTEM \N1 Date 24 AUG 2013, 22:01:25

1.6 SYSGENS or COLDLOADS

Before a COLDLOAD or SYSGEN, you or your system manager may be required to

uninstall XAC libraries. For example, if any of your COMMANDs use the

CHANGEUSER keyword, the VULIB library must be removed and reattached to a

copy of the object code program, usually TACL

1.6.1 Before a SYSGEN or Coldload

Perform this step only if you have attached XAC libraries to object files.

RUN $<vol>.<subvol>.XAC INSTALL

XAC_LIB_UNINSTALL (as required)

Refer to the Appendix E14: “XAC_LIB_INSTALL” on page 266 for a full explanation

and examples of this macro.

1.6.2 After a SYSGEN or Coldload

Perform this step only is you wish to attach XAC libraries to object files.

RUN $<vol>.<subvol>.XAC INSTALL

XAC_LIB_INSTALL (as required)

Refer to the Appendix E14: “XAC_LIB_INSTALL” on page 266 for a full explanation

and examples of this macro.