Manualshelf

XYGATE Compliance PRO (XSW) Reference Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series
131132133134135136137138139140
XYGATE
®
Compliance PRO
™
Reference Manual
Chapter 5. Collection Specifications
XYPRO Technology Corporation 112 Proprietary and Confidential
5.6.2 Secondary Nodes
16. Select the Host Connection tab. Disconnect from the current connection if you did
not do so already.
17. Select a subordinate node. Connect to this node.
18. Select the Setup Criteria tab.
19. Specify the same collection name as you used for the primary collection in step 5.
20. Select the same entities as the primary collection.
21. Select the Collection Run-time Options tab.
22. Set this collection to be a Secondary collection.
23. Set the Collection Type to match the primary collection. If you select Batch, set the
same calendar parameters.
24. Select the Advanced Loading Selections tab.
25. Select the same features for this collection as the primary collection.
26. Click Save to save the collection definition.
27. If you have initiated the Primary collection, you must now initiate the secondary.
Click Initiate.
At this point, repeat steps 16 through 27 as necessary for each subordinate collection.
The collection will not be complete until all participating nodes are collected and
loaded.