XYGATE Compliance PRO (XSW) Reference Manual

XYGATE
®
Compliance PRO
™
Reference Manual
Chapter 1. Installing Compliance PRO (XSW)
XYPRO Technology Corporation 9 Proprietary and Confidential
Discovering XSW ($*.*) ...
Discovery complete.
SEL LOCATION VERSION OWNER AVAILABILITY
--- ----------------- ------- ----------------- ------------
1) $VOL.JIM XYPRO.JAMES Available
P) Prompt for new location Available
Press BREAK or <CONTROL>-Y to exit.
Enter available selection:
If this is a new install, one of the following will be true:
 no environments will be located or
 no available environments will be located or
 a new environment needs to be installed.
If existing environments are located, select the P option to install a new environment.
Enter available selection: P
Referring to Table 1 values, enter a Volume name or accept the default volume
displayed by the prompt.
Enter XSW volume <$VOL>? 
Then enter a subvolume name at the prompt. It would be helpful to identify it as the
XSW subvolume using a name such as XYGATEXS or XSWPROD, etc.
Enter XSW subvol <XSW160>? 
Product locations established.
Performing verifications ...
Verifying the system catalog can be written to ...
Verified the system catalog can be written to.
Verifications complete.
Unpaking products:
Unpaking XTRBIN ...
Unpak of XTRBIN complete.
Unpaking products complete.
Installing products:
Installing XSW from \X.$VOL.ZXYPROSW ...
$SYSTEM is not recommended as a temporary volume location.
The AutoInstall script prompts for a temporary storage volume. The XYGATESW
product will use this disk volume to store information collected about the host when the
product executes.
Temporary Collection storage volume <$VOL>? 
Install of XSW complete.
Installing XTR from $VOL.P46DSDST ...
Customizing XTR ...