XYGATE Compliance PRO (XSW) Reference Manual

XYGATE

Compliance PRO

™

Reference Manual

Chapter 1. Installing Compliance PRO (XSW)

XYPRO Technology Corporation 11 Proprietary and Confidential

Example:

TACL> RUN \X.$VOL.ZXYPROSW.LICENSES

File Utility Program - T6553H01 - (26APR2010) System \X

license $VOL.XSW160.USERINFO

license $VOL.XSW160.ACLINFO

license $VOL.XSW160.OSSLIB

secure $VOL.XSW160.xygatesw,,progid

secure $VOL.XSW160.xyswstrt,,progid

Licensing $VOL.XTR156.ADOPT

Licensing $VOL.XTR156.USERINFO

TACL> Logoff as the SUPER.SUPER or SUPER alias.

When you complete the licensing tasks, answer Y to the prompt to continue.

Are you ready to continue <Y/N>? Y

Establishing product locations ...

Product locations established.

Performing verifications ...

Verifications complete.

Installing products:

Install of products complete.

Performing products syntax check ...

Products syntax check complete.

Verifying XSW is listed in XTR TRACL file ...

Done verifying XSW is listed in XTR TRACL file.

XYGATE GUIs use a LISTNER process to connect to the host.

You may choose to have a XYGATE LISTNER started now.

WARNING: The XYGATE LISTNER is intended for testing your XYGATE/TR

configuration. This XYGATE LISTNER process may disappear. To assign

a permanent LISTNER, add the following to $SYSTEM.ZTCPIP.PORTCONF

and restart the HP LISTNER:

The port connection for the GUI/PC modules can be permanently set up to the

system’s PORTCONF file using the following information. If the port is defined in this

manner, it will be restarted each time the system is cold-loaded or TCP/IP is re-started.

1121 $VOL.XTR156.XYGATETR -server

If this is a new install, you will be asked to start the LISTNER process for connection

from the PC/GUI products. Starting the LISTNER is not a requirement for the server

portion of the XSW product. It may be started at anytime. If started now, it will bind

itself to the port number you previously entered in the script.

Would you like to start the XYGATE LISTNER now <Y/N>? Y

The GUI/PC modules will not be able to connect without a LISTNER set up via this

script or via the PORTCONF. Refer to the GUI Product User Guides from XYPRO for