XYGATE Compliance PRO (XSW) Reference Manual

XYGATE
®
Compliance PRO
™
Reference Manual
Chapter 1. Installing Compliance PRO (XSW)
XYPRO Technology Corporation 12 Proprietary and Confidential
more information on LISTNERs (refer to “Additional XYPRO Reference Manuals” in
the “Introduction” for the instructions on how to get this and other XYPRO manuals).
WARNING: The start listner macro is intended for testing your
XYGATE/TR configuration. For production usage, you must use the
HP Listner by making entries in your PORTCONF.
XYLISTEN has bound to port : 1121
Listner process $Y4LA started.
Taking inventory ...
Taking inventory complete.
Validating the installation ...
A final status screen will display the current XSW environment.
Product Distribution Version Installed Version
-------- -------------------- -----------------
XSW 2.60 2.60
XTR 1.56 1.56
Listner is running and listening on port 1121.
-----------------------------------------------------------------
Validation finished. If no errors were reported, and the
information shown was as expected, the installation was
validated.
-----------------------------------------------------------------
This ends the AutoInstall installation of the XSW files.
1.4 Upgrading XSW Using the AutoInstall Script
1. Locate the distributed subvol (DSV) ZXYPROSW. The DVD setup program
defaults to placing the software on the host in $SYSTEM.ZXYPROSW.
You should not run the AutoInstall script from the DSV because running the script
changes values inside files in that location. DUP the files to another location and
run the installation software from that other location so that the installation software
can be refreshed to its original state if the need arises.
Syntax:
TACL> VOLUME [$NEWVOL].ZXYPROSW
Example:
TACL> VOLUME $MYVOL.ZXYPROSW
2.
Purge the old installation staging subvolume.
If you know the location of the initial installation staging subvolume, PURGE all
files to remove the old installation staging files. If you have selected a new location,
you may skip this step.
Syntax:
$MYVOL ZXYPROSW 3> FUP PURGE [$VOL].[NEWSVOL].* !