XYGATE Compliance PRO (XSW) Reference Manual

XYGATE

Compliance PRO

™

Reference Manual

Chapter 3. Starting Compliance PRO (XSW) the First Time

XYPRO Technology Corporation 49 Proprietary and Confidential

3.3 Connect to Host Node

After you have set your preferences, you will be presented with a connection

configuration screen as shown below.

Enter the TCP/IP address (IPV4 or IPV6 or DNS name and communication port for

the Transaction Router server (XTR server)) on the node you wish to connect to.

Note: To use IPV6 addresses as a client and host connection, the XSW 2.80 GUI

must be installed on the PC and use XTR 1.60 server and XTR 1.60 or

1.61 client. (The XTR 1.6x client is bundled with the XSW 2.80 GUI.)

Enter the port for XTR to use.

This port was set when you changed your system PORTCONF file to include the

XTR entry or when you started XYLISTEN using XTR_START_LISTNER. If this

port is not defined, the LISTNER does not recognize any requests from the XSW

GUI and you will get the message “No response received” when you click

Connect.

Enter the userid or alias that will be used to collect the dataset.

Enter the password of the userid or alias.

Click Connect to start the host connection.