XYGATE User Authentication Reference Manual

XYGATE
®
User Authentication
™
(XUA) 1.85 Reference Manual
Chapter 13. Configuring the RSA SecurID Interface
XYPRO Technology Corporation 96 Proprietary and Confidential
13.3.4 Telserv Process Configuration Checking
To make sure your Telserv process is using the TCPIP stack intended for
communication between the NonStop host and the SecurID authentication server,
perform the checks suggested in this section.
1. Determine the Telserv process used by your session.
$DATA WORK> who
Home terminal: $ZTN0.#PT8RM7V
TACL process: \NODE.$Y8WH
Primary CPU: 0 (NSE-D)
Default Segment File: $VEBG.#0002437
Pages allocated: 28 Pages Maximum: 1036
Bytes Used: 16944 (0%) Bytes Maximum: 2121728
Current volume: $DATA.WORK
Saved volume: $DATA.WORK
Userid: 255,255 Username: SUPER.SUPER Security: "OOOO"
Logon name: SUPE.SUPER
2.
Determine what TCP/IP process is configured for the use of the Telserv process.
$DATA WORK 13> SCF
SCF - T9082H01 - (04DEC06) (15NOV06) - 04/09/2008 15:20:29 System \NODE
(C) 1986 Tandem (C) 2006 Hewlett Packard Development Company, L.P.
(Invoking \NODE. $DATA.WORK.SCFCSTM)
1-> INFO PROCESS $ZTN0, DETAIL
TELSERV Detailed Info PROCESS \NODE.$ZTN0
PCPU................... 0 BCPU................... 1
PPIN................... 376 BPIN................... 373
TACL................... ON Transport Process..... $ZTC0
*Menu................... ON Transport Type......... TCP/IP
*Timeout Value.......... N/A Port................... 23
*Banner Timeout Value... N/A Total Services......... 7
*Max Terminals.......... 512 Total Terminals........ 20
Program................ \NODE.$SYSTEM.SYS12.TELSERV
*CPU List...... 0 ,1 ,2 ,3 ,4 ,5 ,6 ,7 ,8 ,9 ,10 ,11 ,12 ,13 ,14 ,15
*DROPCR................. ON
2->
In the example above, the TCPIP process used for the Telserv is $ZTC0. This
process must match the RSA_PROXY_IP_PROC value in the UACONF file.
3. Check if a DEFINE for a process other than TCP/IP process from step 2 is loaded
to your session.
$DATA WORK 3> INFO DEFINE **
Define Name =TCPIP^PROCESS^NAME
CLASS MAP
FILE \NODE.$ZTC0
Define Name =_DEFAULTS
CLASS DEFAULTS
VOLUME $DATA.WORK
The Telserv process name in
this example is $ZTN0
This TCP/IP
process is
used.
The DEFINE must either match the
value from step 2, or not exist.
Telserv process name determined in step 1.