XYGATE User Authentication Reference Manual

XYGATE
®
User Authentication
™
(XUA) 1.85 Reference Manual
Chapter 13. Configuring the RSA SecurID Interface
XYPRO Technology Corporation 103 Proprietary and Confidential
What is the TCP/IP process name <$ZTCP2>?
Refer to your answer to Question 2 in Table 5. Specify the name of the current
TCP/IP process through which XUA will communicate with the proxy. The name
you specify here will be entered in the UACONF as the value for
RSA_PROXY_IP_PROC.
How many seconds should XUA wait for a RSA response before timeout occurs<5>?
XUA will wait for this number of seconds for a response from the RSA
Authentication Manager to decide that it is not available. Once the timeout is
reached, XUA will process the logon request depending on the
RSA_AUTHENTICATE configuration in the next prompt.
Do you want to use RSA authentication for all NonStop users <No>?
Refer to your answer to Question 4 in Table 5. Your response determines whether
or not all users, some users, or no users will be authenticated via the RSA SecurID
method. The value you specify here will be entered in the UACONF as the value
for RSA_AUTHENTICATE.
Do you want to require a password in addition to the SecurID token for all NonStop
users <NO>?
Refer to your answer to Question 5 in Table 5. Your response determines whether
or not all users, some users, or no users will be required to enter a PASSWORD in
addition to their RSA PASSCODE. The name you specify here will be entered in
the UACONF as the value for RSA_REQUIRE_PASSWORD.
RSA configuration :
! ------------- RSA UACONF Section -----------------------
RSA_PROXY_IP_PROC $ZTCP2
RSA_PROXY_TIMEOUT 5
!RSA_PROXY_ENV "export RSATRACELEVEL=255 && export RSACEDEST=/rsa/trace.log"
RSA_AUTHENTICATE OFF
RSA_REQUIRE_PASSWORD OFF
RSA_PROXY_LOG /G/system/xua160/zzrsalog
Do you want to configure the RSA interface now <Y>?
The last prompt allows you to review the summary of your decisions. If you
answered Y, the UACONF file will be modified and the proxy server will be
installed. If you answered N, the macro quits without making the modifications so
that you will have to run it again later.