XYGATE User Authentication Reference Manual

XYGATE
®
User Authentication
™
(XUA) 1.85 Reference Manual
Chapter 13. Configuring the RSA SecurID Interface
XYPRO Technology Corporation 107 Proprietary and Confidential
alias account was checked with the Safeguard. In this case, the mapping was used,
but RSA authentication failed due to an invalid PASSCODE.
Important! The following is a known issue with Safeguard. If the Safeguard
authentication event is enabled and if the RSA_REQUIRE_PASSWORD is set to ON
in the UACONF or UAACL file, then RSA authentication will not work correctly in
What-if mode.
13.10 Utilities and Programs Incompatible with RSA SecurID
RSA SecurID authentication has limited capabilities on the NonStop server. Due to the
programmatic nature of authentication prompts in many NonStop utilities and
programs, some will not support the RSA SecurID method of authentication for logons
or other features.
The table below lists the programs and utilities that are known to not support the
RSA SecurID authentication.
Program or Utility Function RSA Authentication Support
XAC VERIFYUSER keyword Not supported below XAC v5.30
XPC VERIFYUSER keyword Not supported below XPC v3.30
XCF GUI Logon Not supported
XMI Logon Not supported
XPR GUI Logon Not supported below XPR v2.21
XRM GUI Logon Not supported below XRM v1.30
XSM GUI Logon Not supported
XSW GUI Logon Not supported
XTR User Switching Not supported
Batchcom "CHANGEUSER"
command
Not supported
OSM Logon Supported, but a misleading EMS "invalid
user" message is generated
ODBC/MX Logon Not supported
JDBC/MX Logon Not supported
FTP using Outside
View
Logon Not supported below
Outside View v7.3d
DSM/SCM Logon Not supported
Visual Inspect Logon Not supported