XYGATE User Authentication Reference Manual

XYGATE
®
User Authentication
™
Reference Manual
Chapter 14. Configuring the RADIUS Interface
XYPRO Technology Corporation 117 Proprietary and Confidential
DEFINE NAME = =_SRL_01
CLASS = MAP
FILE = \node.$SYSTEM.SYS12.ZTCP6SRL
5.
Check configuration of the TCP/IP process for Host ID and Host Name values.
$DATA WORK 4> SCF
SCF - T9082H01 - (04DEC06) (15NOV06) - 04/10/2008 15:25:07 System \NODE
(C) 1986 Tandem (C) 2006 Hewlett Packard Development Company, L.P.
(Invoking \NODE.$DATA.WORK.SCFCSTM)
1-> info process $ztc0, detail
TCPIP Detailed Info PROCESS \NODE.$ZTC0
*TCP Send Space......... 61440D *TCP Receive Space...... 61440D
*UDP Send Space......... 9216D *UDP Receive Space...... 42080D
*Delay Ack Time......... 20 *Delay Ack.............. ON
*Keep Alive Idle........ 75 *Keep Alive Retry Cnt... 8
*Keep Alive Interval.... 75 QIO Limit.............. 100%
*Host ID ............... 10.1.1.74
*Host Name ............. NODE.MYCOMPANY.COM
Program Filename ...... \NODE.$SYSTEM.SYS12.TCP6SAM
*Debug.................. OFF
*Full Dump.............. ON
*All Nets Are Local..... ON
*TCP Compat 42.......... ON
*EXPAND Security........ OFF
*TCP Path MTU........... ON
*TCP Time Wait.......... 10
Trace Status........... OFF
Trace Filename ........
*ARP Timer Refreshed ... OFF
*RFC1323 Enable ........ ON
More text? ([Y],N)
6.
Check configuration of the TCP/IP process for subnet settings.
$DATA WORK 4> SCF
1-> info subnet $ztc0.#*
TCPIP Info SUBNET \N1.$ZTC0.#*
Name Devicename *IPADDRESS TYPE *SUBNETMASK SuName QIO *R
#SN1 \NODE.L10023C 10.1.1.74 ETHERNET %HFFFFFF00 ON N
#LOOP0 127.0.0.1 LOOP-BACK %HFF000000 OFF N
The process name ($ztc0) is determined in step 2.
The process name ($ztc0) is determined in step 2.
The IP address must match the Host ID in step 5.
Both the Host ID and Host Name
must be defined and be true.