XYGATE User Authentication Reference Manual

XYGATE
®
User Authentication
™
Reference Manual
Chapter 14. Configuring the RADIUS Interface
XYPRO Technology Corporation 119 Proprietary and Confidential
14.4 Considerations for RADIUS Configuration
Table 6 below lists the prompts you will be required to answer when you run the
XUA_RADIUS_INSTALL macro. You should determine these configuration values in
advance to have them ready before you run the macro.
Table 6: UACONF Configuration Settings for RADIUS
Question Configuration Settings Default Values Value
1 Do you want to configure the RADIUS
interface?
Y
2 What is the DNS name or IP address of the
RADIUS server?
–
3 What is the TCP/IP process name?
(See Question 3 below.)
TCP/IP process
for the TACL
from which the
installation
macro is
executed.
4 How many seconds should XUA wait for a
RADIUS response before timeout occurs?
30
5 Do you want to use RADIUS authentication for
all NonStop users? (See Question 5 below.)
No (OFF)
6 Do you want to require a Guardian password in
addition to RADIUS authentication for all
NonStop users? (See Question 6 below.)
No (OFF)
7 Enter RADIUS shared secret? –
8 Do you want to configure the RADIUS interface
now?
Yes
Question 3: Is the current TCP/IP process configured correctly?
The TCP/IP process for the RADIUS interface must have the Host ID (the system’s
IP address) and Host Name (the system’s DNS name) configured in SCF.
Example: How to find the NonStop’s Host ID and Host Name
2> scf
SCF - T9082H01 - (04DEC06) (15NOV06) - 11/12/2007 15:05:31 System \N1
(C) 1986 Tandem (C) 2006 Hewlett Packard Development Company, L.P.
(Invoking \N1.$VTLH.TERRI.SCFCSTM)
1-> info process $ZTC0,detail
TCPIP Detailed Info PROCESS \N1.$ZTC0
*TCP Send Space......... 61440D *TCP Receive Space...... 61440D
*UDP Send Space......... 9216D *UDP Receive Space...... 42080D
*Delay Ack Time......... 20 *Delay Ack.............. ON
*Keep Alive Idle........ 75 *Keep Alive Retry Cnt... 8
*Keep Alive Interval.... 75 QIO Limit.............. 100%
*Host ID ............... 10.1.1.95
*Host Name ............. N1.XYPRO.COM
Program Filename ...... \N1.$SYSTEM.SYS10.TCP6SAM