XYGATE User Authentication Reference Manual

XYGATE
®
User Authentication
™
(XUA) 1.85 Reference Manual
Chapter 16. What-if Testing
XYPRO Technology Corporation 161 Proprietary and Confidential
REPEAT <count> Repeats a command
TIME <dd[mm[yyyy]],hh :mm]>
Time entered will be simulated.
Example : TIME 01012010,09 :00 (January 1, 2010)
TIME Returns to actual time.
USERAUTH Toggles the program between using a call to
user_authenticate_ and the internal program logic
for EXPLAIN testing.
]
Access check:
16.13.9 H or HISTORY
This command is used to display your previous commands. To display a specific
number of commands, enter a number in the command following HISTORY.
Example 10: How to display the session history of your What-if commands
Access check:H
1 LOGON UATEST.TEST001 * UATEST.TEST002
2 LOGON UATEST.TEST001 * alias:"uatst"
3 LOGON UATST.TEST003 * UATST.TEST001 $SYSTEM.XYGATEAC.XYGATEAC * *
4 LOGON UATST.TEST005 * 0,0 * $SYSTEM.ZTCPIP.LOGIN *
5 LOGON UA.TEST003 * 0,0 * * 123.456.78.90
6 LOGON UATST.TEST003 * 0,0 * * 123.456.78.90 NO DEFAULT
Access check:
16.13.10 IGNOREPASSWORD
Syntax:
IGNOREPASSWORD {ON | OFF}
If set to ON, you do not have to enter a password when prompted during testing;
simply press Enter to continue.
If set to OFF, the default, you must enter the TO_USER’s password to complete the
logon test.
16.13.11 MONITOR
This command causes XUA to generate a monitor dump for the What-if session.
Note: Monitor dumps can be quite sizeable and should only be created under direction
from XYPRO Technology.
Syntax:
MONITOR <output file>
Example 11: How to generate a monitor dump for the What-if session
$SYSTEM XYGATEUA 26> RUN XYGATEUA ACCESS
XYGATEUA 1.70 (c) 1999-2010 XYPRO Technology Corporation XYPRO \XYS7000 20031231
UACONF CHECKSUM 758712878 ($SYSTEM.XYGATEUA.UACONF)