XYGATE User Authentication Reference Manual

XYGATE
®
User Authentication
™
(XUA) 1.85 Reference Manual
Appendix A: The UACONF File
XYPRO Technology Corporation 204 Proprietary and Confidential
UACONF RADIUS Authentication Keywords
This section describes the UACONF keywords required to configure the password
verification via RADIUS server.
RADIUS_AUTHENTICATE { ON | OFF | OPTIONAL }
RADIUS_HOST <DNS name| IP address>
RADIUS_PORT <port number>
RADIUS_PROXY_ENV "<string>"
RADIUS_PROXY_IP_PROC <$process name>
RADIUS_PROXY_LOG <oss pathname>
RADIUS_PROXY_TIMEOUT <number>
RADIUS_REQUIRE_PASSWORD { ON | OFF }
UACONF RSA Authentication Keywords
This section describes the UACONF keywords required to configure the password
verification via RSA SecurID technology.
RSA_AUTHENTICATE { ON | OFF | OPTIONAL }
RSA_PROXY_ENV <value supplied by XYPRO Support>
RSA_PROXY_IP_PROC <$process name>
RSA_PROXY_LOG <OSS directory to host proxy activity log files>
RSA_PROXY_TIMEOUT <number of seconds>
RSA_REQUIRE_PASSWORD { ON | OFF }
UACONF Troubleshooting Keywords
The keywords described in this section are created as comments in the UACONF file
at the time of installation. These keywords should only be “uncommented” at XYPRO’s
request while troubleshooting. The keywords listed here are for reference only.
MONITOR <filename>
MONITOR_ACCESS_CHECK <filename>
MONITOR_AUDIT_SERVER <filename>
MONITORAUDIT { ON | OFF }
If any of the specialty configurations were done, such as interfacing to an LDAP, RSA
or RADIUS server, a block of the specialty keywords would be added to the UACONF
file by the specialty configuration macros. Refer to Chapter 12 for LDAP, Chapter 13
for RSA SecurID, and Chapter 14 for the RADIUS configurations.