XYGATE User Authentication Reference Manual

XYGATE
®
User Authentication
™
(XUA) 1.85 Reference Manual
Chapter 12. Configuring the LDAP Interface
XYPRO Technology Corporation 66 Proprietary and Confidential
1-> INFO PROCESS $ZTN0, DETAIL
TELSERV Detailed Info PROCESS \NODE.$ZTN0
PCPU................... 0 BCPU................... 1
PPIN................... 376 BPIN................... 373
TACL................... ON Transport Process..... $ZTC0
*Menu................... ON Transport Type......... TCP/IP
*Timeout Value.......... N/A Port................... 23
*Banner Timeout Value... N/A Total Services......... 7
*Max Terminals.......... 512 Total Terminals........ 20
Program................ \NODE.$SYSTEM.SYS12.TELSERV
*CPU List...... 0 ,1 ,2 ,3 ,4 ,5 ,6 ,7 ,8 ,9 ,10 ,11 ,12 ,13 ,14 ,15
*DROPCR................. ON
2->
In the example above, the TCPIP process used for the Telserv is $ZTC0. This
process must match the LDAP_PROXY_IP_PROC value in the UACONF file.
3. Check if a DEFINE for a process other than TCP/IP process from step 2 is loaded
to your session.
$DATA WORK 3> INFO DEFINE **
Define Name =TCPIP^PROCESS^NAME
CLASS MAP
FILE \NODE.$ZTC0
Define Name =_DEFAULTS
CLASS DEFAULTS
VOLUME $DATA.WORK
4.
Check if a define for a process other than TCP/IP process from step 2 is loaded in
your OSS session.
/etc: info_define all
DEFINE NAME = =PTCPIP^FILTER^KEY
CLASS = MAP
FILE = \NODE.$SYSTEM.CONFPTCP.FILTER
DEFINE NAME = =TCPIP^PROCESS^NAME
CLASS = MAP
FILE = \NODE.$ZTC0
DEFINE NAME = =_DEFAULTS
CLASS = DEFAULTS
VOLUME = $DATA.WORK
DEFINE NAME = =_SRL_01
CLASS = MAP
FILE = \node.$SYSTEM.SYS12.ZTCP6SRL
5.
Check the configuration of the TCP/IP process for the Host ID and Host Name
values.
$DATA WORK 4> SCF
SCF - T9082H01 - (04DEC06) (15NOV06) - 04/10/2008 15:25:07 System \NODE
(C) 1986 Tandem (C) 2006 Hewlett Packard Development Company, L.P.
(Invoking \NODE.$DATA.WORK.SCFCSTM)
This TCP/IP
process is
used.
The DEFINE must either match the
value from step 2, or not exist.
The DEFINE must either match the
value from step 2, or not exist.
Telserv process name determined in step 1.