XYGATE User Authentication Reference Manual
XYGATE
®
User Authentication
™
(XUA) 1.85 Reference Manual
Chapter 12. Configuring the LDAP Interface
XYPRO Technology Corporation 69 Proprietary and Confidential
Reply from 10.1.1.96: bytes=32 time=10ms TTL=255
Reply from 10.1.1.96: bytes=32 time=10ms TTL=255
Reply from 10.1.1.96: bytes=32 time=10ms TTL=255
Reply from 10.1.1.96: bytes=32 time=10ms TTL=255
Ping statistics for 10.1.1.96:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 10ms, Maximum = 10ms, Average = 10ms
4.
PING the LDAP host system by the DNS Name from the NonStop system.
$DATA WORK 14> ping ldap-suselinux10.mycompany.com
PING ldap-suselinux10.mycompany.com: 56 data bytes
64 bytes from 10.1.101.16: icmp_seq=0. time=22. ms
64 bytes from 10.1.101.16: icmp_seq=1. time=10. ms
64 bytes from 10.1.101.16: icmp_seq=2. time=10. ms
64 bytes from 10.1.101.16: icmp_seq=3. time=10. ms
---- ldap-suselinux10.mycompany.com PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 10/13/22
12.4 Considerations for LDAP Configuration
Table 4 below is a list of the prompts you will be required to answer when you run the
XUA_LDAP_INSTALL macro. Some of them apply globally, and some are “per LDAP
authentication point” if multiple LDAP authentication points are to be configured.
Review this table and the explanations in the corresponding item numbers of the next
section “Running the LDAP Install Macro” and then fill in your values in the column.
Table 4: UACONF Configuration Settings for LDAP
Item Configuration Settings Default Values Per
LDAP
Value
1
Do you want to configure the LDAP
interface?
Y N
2
What is the DNS name or IP address
of the LDAP server?
– Y
3
What is the LDAP server version?
3 Y
4
What is the LDAP server type
(Windows or OpenLDAP)?
WINDOWS Y
5
What is the TCP/IP process name? TCP/IP process for
TACL from which
the installation
macro is executed.
Y
6
What BIND name is used for the
LDAP server?
– Y
7
How many seconds should XUA wait
for an LDAP response before timeout?
5 Y
The DNS name was
successfully resolved to
the correct IP address.
The DNS name was
successfully resolved to
the correct IP address.