ZLE Adapter for ATMs, POS Reference Manual

©Opsol Integrators Inc. Page 6 of 12
528947-001
k. Modify NSIM-DIST-TCP-NAME-1 to specify the name of the
TCP/IP Process used for connection. The applications will
use the IP address associated with this TCP/IP process and
the port specified by NSIM-DIST-LISTEN-PORT param to
communicate.
l. Modify NSIM-LIC to specify the name of the license file.
ZLEADAP Server Parameters:
m. Modify ADAP-PCOL to specify the name of the primary EMS
collector.
n. Modify ADAP-DIST-PROCESS-NAME to specify the name of
the DIST process.
o. Modify ADAP-LOG-NAME to specify the name of the log file
for error messages and tracing.
p. Modify ADAP-MAX-CONNECT to specify the maximum
number of active connections to the server.
q. Modify ADAP-ZGATE-PATHMON-NAME to specify the
pathmon name of the gateway process.
r. Modify ADAP-ZGATE-SERVERCLASS-NAME to specify the
serverclass name of the gateway class.
s. Modify ADAP-TRANSACTION-TIMEOUT to specify the
transaction timeout value for gateway to respond.
t. Modify ADAP-TRACE to specify the switch to turn ON or
OFF the trace facility.
u. Modify ADAP-IM to specify the parameter to enable or
disable transactions to IM.
v. Modify ADAP-IM-TIMEOUT to specify the timeout value for
IM to respond.
w. Modify ADAP-IM-PATHMON-NAME to specify the pathmon
name of the IM process.