ZLE Adapter for ATMs, POS Reference Manual

©Opsol Integrators Inc. Page 7 of 12
528947-001
x. Modify ADAP-IM-SERVERCLASS-NAME to specify the
serverclass name of the IM server class.
y. Modify ADAP-LIC to specify the License file name.
7. Start the Opsol ZLE Adapter for ATMs, POS pathway
environment using the STRTPATH file. Refer to note at the end of
this section.
Note: See the sample STRTPATH pathway configuration file
PATHCONF.
At this point, applications can start sending transactions to the Opsol
ZLE Adapter for ATMs, POS. See the following subsection for
instructions on setting up an obey file to start Opsol ZLE Adapter for
ATMs, POS with the correct parameter settings.
Sample Pathway obey files
STRTPATH
pathmon/name $zlepw, nowait, cpu 0/
pathcom/in pathconf /$zlepw
STOPPATH
pathcom $zlepw; shutdown2, mode im
PATHCONF
SET PATHWAY NODEINDEPENDENT ON
SET PATHWAY MAXASSIGNS 5
SET PATHWAY MAXPARAMS 10
SET PATHWAY MAXDEFINES 5
SET PATHWAY MAXPATHCOMS 5
SET PATHWAY MAXLINKMONS 4
SET PATHWAY MAXPROGRAMS 10
SET PATHWAY MAXTCPS 4
SET PATHWAY MAXTERMS 10
SET PATHWAY MAXSERVERCLASSES 28
SET PATHWAY MAXSERVERPROCESSES 28
SET PATHWAY MAXSTARTUPS 5