HP Officejet Pro X series - Printbar Install Guide
13
51
Interpret 61 tap test results (Align and color calibrations)
NOTE: If you press and hold the up or down arrows, the tap count will start incrementing by 10, or 100.
An acceptable 61 tap test has identical values for the parameters in the “Color scale (factory)” (callout 1) and “Color scale (current)” (callout 2) on
the printed report areas. “Color scale (factory)” (callout 1) and “Color scale (current)” will be identical after a main PCA replacement, but may not
be the same under other conditions. The values should also be identical after a printbar replacement.
&RORUVFDOHIDFWRU\
GLD
.[HHF[IF[[[[[IFI[E[FHD[G
&[G[IER[[E[F[D[IF[HG[GHD[IH
0[G[IER[[E[F[D[IF[HG[GHD[IH
<[G[IER[[E[F[D[IF[HG[GHD[IH
&RORUVFDOHIDFWRU\
GLD
.[HHF[IF[[[[[IFI[E[FHD[G
&[G[IER[[E[F[D[IF[HG[GHD[IH
0[G[IER[[E[F[D[IF[HG[GHD[IH
<[G[IER[[E[F[D[IF[HG[GHD[IH
.[HHF[IF[[[[[IFI[E[FHD[G
&[G[IER[[E[F[D[IF[HG[GHD[IH
0[G[IER[[E[F[D[IF[HG[GHD[IH
<[G[IER[[E[F[D[IF[HG[GHD[IH
&RORUVFDOHIDFWRU\
GLD
.[HHF[IF[[[[[IFI[E[FHD[G
&[G[IER[[E[F[D[IF[HG[GHD[IH
0[G[IER[[E[F[D[IF[HG[GHD[IH
<[G[IER[[E[F[D[IF[HG[GHD[IH
&RORUVFDOHIDFWRU\
GLD