HP Officejet Pro X series - Printbar Install Guide

3
7 8

Lift the service sled cartridge from the product.
NOTE: Do not touch the web contact roller during the
removal process. The roller is saturated with ink. Also, any
contaminants from your hands that transfer to the roller
could aect print quality.
Remove two screws (callout 1) from the front of the product.
9 10

Remove two screws (callout 1) from the rear of the product.
Remove the right cross brace.
11 12

Remove one screw (callout 1) from behind the ag.
Rotate the web advance rack assembly upward to clear the tab
from the right wall, and then remove the web advance rack
assembly.