HP ProLiant Updates Catalog (v 2013.02.0) User Guide Abstract This guide describes the procedures and prerequisites for installing and using the HP ProLiant Updates Catalog, which provides firmware and software from the SPP for the SCCM Software Updates and the SCVMM Update Catalog features.
© Copyright 2013 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice.
Contents 1 Introduction...............................................................................................4 2 Support matrix...........................................................................................5 Supported System Center products..............................................................................................5 Supported managed operating systems.......................................................................................5 Supported managed servers......
1 Introduction The HP ProLiant Updates Catalog provides firmware and software from the SPP for the SCCM Software Updates feature and SCVMM Update Catalog feature. What’s New in this release: 4 Included Component Version HP Service Pack for ProLiant 2013.02.
2 Support matrix Supported System Center products The catalog can be used on the following System Center products: SCCM 2007 SCCM 2007 SP1 (R2 can be installed) SCCM 2007 SP2 (R2 or R3 can be installed) SCCM 2012 SCCM 2012 SP1 NEW SCVMM 2012 SCVMM 2012 SP1 NEW Supported managed operating systems The catalog can be deployed to the following operating systems: Windows Server 2003 x86 (SP and edition agnostic) Windows Server 2003 x64 (SP and edition agnostic) Windows Server 2008 x86 (SP and edition agnostic)
3 Installing the HP ProLiant Updates Catalog Considerations Ensure that SCUP, WSUS, SCCM / SCVMM, and the managed servers are all properly configured for use with the Software Updates functionality. Installation The HP ProLiant Updates Catalog is registered with Microsoft as a partner catalog. Add and import the catalog like any other standard catalog.
4 Using the HP ProLiant Updates Catalog The catalog updates appear in the SCUP console under the HP ProLiant Updates subfolder. Deploy the updates like any other standard update. IMPORTANT: • Before publishing to WSUS 3.0 or earlier, ensure that the WSUS LocalPublishingMaxCabSize variable has been increased to at least 1024. • After publishing an update to SCCM 2012 and before deploying the update to a collection, increase the update's Maximum run time value from the default value to 30 minutes.
5 Reference The HP ProLiant Updates Catalog consists of bundles. The bundles provide a simple and convenient mechanism for deploying firmware and software. The bundle's contents are a portion of the SPP. The bundle’s version number corresponds to the SPP it was generated from. Inside each bundle HP SUM is used to install the included firmware or software. The catalog and bundles are updated whenever a new SPP becomes available. Bundle Description HP ProLiant Server Firmware ####.##.
6 Troubleshooting The compliance percentage is 0% This situation occurs if the managed server is updated either manually or by using the old Hewlett-Packard Server Updates Catalog. The new HP ProLiant Updates Catalog uses different applicability rules, so the compliance percentage reads 0%. To resolve this issue: Deploy the HP ProLiant Updates Catalog updates. No firmware or software is updated, but the data for the applicability rules is generated and the compliance percentage is updated.
7 Deploying firmware and software updates manually In addition to the catalog, it is possible to deploy firmware and software updates using an SCCM Software Distribution package. There are several ways to create and use a Software Distribution package. To deploy HP firmware and software to a managed ProLiant server while minimizing network bandwidth: 1. Create a folder on the SCCM primary site server. 2. Copy all of the required HP SUM files into the folder.
7. Edit the new task sequence. a. Click Add, and for SCCM 2007 select General→Install Software, or for SCCM 2012 select General→Install Package. Set the Package field to the package created in Step 5. b. Click Add and select General →Restart Computer. Set the Specify what to run after restart field to The currently installed default operating system and uncheck Notify the user before restarting. 8. Advertise the task sequence to a collection.
8 Support and other resources Information to collect before contacting HP Be sure to have the following information available before you contact HP: • Software product name • Hardware product model number • Operating system type and version • Applicable error message • Third-party hardware or software • Technical support registration number (if applicable) If you purchased HP Insight Control for Microsoft System Center as part of an HP Insight Control license, you are entitled to 24 x 7 HP Softw
http://www.hp.com/go/hpsc After creating your profile and linking your support agreements to your profile, see the Software Updates and Licensing portal at http://www.hp.com/go/hpsoftwareupdatesupport to obtain software, documentation, and license updates. Warranty information HP will replace defective delivery media for a period of 90 days from the date of purchase. This warranty applies to all Insight Management products.
[] In command syntax statements, these characters enclose optional content. {} In command syntax statements, these characters enclose required content. | The character that separates items in a linear list of choices. ... Indicates that the preceding element can be repeated one or more times. WARNING An alert that calls attention to important information that, if not understood or followed, results in personal injury.
9 Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback (docsfeedback@hp.com). Include the document title and part number, version number, or the URL when submitting your feedback.
Glossary CDM Custom Data Manager DMC Device Monitor Console DMS Device Monitor Service OSD Operating System Deployment PSP HP ProLiant Support Pack SCCM System Center Configuration Manager SCOM System Center Operations Manager SCUP System Center Updates Publisher SCVMM System Center Virtual Machine Manager SPP HP Service Pack for ProLiant STK HP Scripting Toolkit SUM HP Smart Update Manager WSUS Windows Server Update Services 16 Glossary