HP OneView REST API Reference

logical-interconnects
logical-interconnects.html[10/17/2013 10:35:29 AM]
sampleInterval: description: Telemetry sample interval in seconds
default: 300
required: true
maximum: 300
minimum: 1
type: integer
type: description: Identifies the resource type. This field must be set to 'telemetry-configuration'.
type: string
description: description: Brief description of the resource
type: string
name: description: Display name for the resource
type: string
state: description: The current resource state of the Logical Interconnect. The supported values are enumerated in the table below.
type: string
enum: Active
Degraded
Failed
Unknown
eTag: description: Entity tag/version ID of the resource, the same value that is returned in the ETag header on a GET of the resource
type: string
snmpConfiguration: description: The SNMP configuration for this logical interconnect
type: object
Properties
status: description: Overall health status of the resource. The following are the valid values for the status of the resource:Unknown - should
be avoided, but there may be rare occasions where status is Unknown; OK - indicates normal/informational behavior;
Disabled - indicates that a resource is not operational; Warning - needs attention soon; Critical - needs immediate
attention.
type: string
category: description: Resource category used for authorizations and resource type groupings
type: string
name: description: Display name for the resource
type: string
readCommunity: description: Authentication string for read-only access
default: public
type: string
created:
description: Date and time when the resource was created