FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
76 SNMP Reference for Directors and Edge Switches
FxPort Fabric Login Table
An entry containing service parameters established from a successful Fabric
Login.
Fabric
Element MIB
Object
Name
Type
Provided
By
Access Description
fcFxlogiFxPortI
ndex
FcFeFxPortInd
ex
SNMP R This object identifies the FxPort within the
module. This number ranges from 1 to the
value of fcFeModulePortCapacity for the
associated module. The value remains
constant for the identified FxPort until the
module is re-initialized.
This number ranges from 1 to
AS_glob.prod_cnfg_ptr->ports_per_modul
e.
FcFxlogiNxPo
rtIndex
FcFeNxPortInd
ex
SNMP R The object identifies the associated NxPort
in the attachment for which the entry
contains information.
FcFxPortFcph
VersionAgree
d
FcphVersion Login
Server
R The version of FC-PH that the FxPort has
agreed to support from the Fabric Login.
FcFxPortNxPo
rtBbCredit
FcBbCredit Login
Server
R The total number of buffers available for
holding Class 1 connect-request, Class 2 or
Class 3 frames to be transmitted to the
attached NxPort. It is for buffer- to-buffer
flow control in the direction from FxPort to
NxPort. The buffer-to-buffer flow control
mechanism is indicated in the respective
fcFxPortBbCreditModel.
FcFxPortNxPo
rtRxDataField
Size
FcRxDataField
Size
Login
Server
R The Receive Data Field Size of the attached
NxPort. This is a binary value that specifies
the largest Data Field Size for an FT_1
frame that can be received by the NxPort.
The value is in number of bytes and ranges
from 128 to 2112 inclusive.
FcFxPortCosS
uppAgreed
FcCosCap Login
Server
R A variable indicating that the attached
NxPort has requested the FxPort for the
support of classes of services and the FxPort
has granted the request.