FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
100 SNMP Reference for Directors and Edge Switches
Port Table
Generic information on ports for a specific fcConnUnit.
FA MIB
Object
Name
Type Product Mapping Access Description
fcConnUnitPor
tIndex
Unsigned
32
The port index. R A unique value among all
fcConnUnitPortEntrys on this
connectivity unit, between 1
and fcConnUnitNumPorts.
FcConnUnitPo
rtType
INTEGER If the port is Not installed
notPresent(3)
else if the Port State is
online use the operating
Port Type:
F_Port = fPort(8)
FL_Port = flPort(7)
E_Port = ePort(9)
H_Port = hubPort(4)
B_Port = ePort(9)
else use the configured Port
Type:
Gx_Port = gPort(10)
G_Port = gPort(10)
Fx_Port = flPort(7)
F_Port = fPort(8)
E_Port = ePort(9)
R The port type refers to the
protocol active on the port
and can take one of the
following values: unknown
(1) – cannot be determined,
other (2) – none of the
following, notPresent (3) – no
port, hubPort (4) – hub port,
nPort (5) – end port for
fabric, lPort (6) – end port for
loop, flPort (7) – public loop,
fPort (8) – fabric port, ePort
(9) -- fabric expansion port,
gPort (10) -- generic fabric
port, domainController (1) –
domain controller,
hubController (12) – hub
controller, scsi (13) – parallel
SCSI port, escon (14) – escon
port, lan (15) – LAN port,
wan (16) – WAN port.