FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
102 SNMP Reference for Directors and Edge Switches
FcConnUnitPo
rtFCClassOp
FcPortFC
Class
If the port is Not installed
fcConnUnitPortFCClassOp
= 0
else if the Port State is
offline
fcConnUnitPortFCClassOp
= 0
else it depends on the
operating Port Type:
F_Port Use Class of Service
specified in Fabric Login
FL_Port Use Class of Service
specified in one or more
Fabric Login's (OR'd
together)
E_Port 0x58 = classF(0x40)
+ class2(0x10) +
class3(0x08)
R Bit mask that specifies the
classes of service that are
currently operational at this
port. If this object is not
applicable, the agent
must
return all bits set to zero.
FcConnUnitPo
rtState
INTEGER See “Port State
Descriptions” on page 143.
R The current state of the port
hardware. The bypassed
value (4) means that the port
is online but is currently
being isolated from the loop
or fabric for some reason; the
other values are essentially
self-explanatory. Any value
for this object may co-exist
with any value for the
fcConnUnitPortStatus object.
The values are defined as
follows: unknown (1), online
(2), offline (3), bypassed (4).