FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
60 SNMP Reference for Directors and Edge Switches
UDP Listener Table
The UDP listener table contains information about this entity's UDP end-points on
which a local application is currently accepting datagrams.
SNMP Group
Some of the objects defined below will be zero-valued in those SNMP
implementations that are optimized to support only those functions specific to
either a management agent or a management station. In particular, it should be
observed that the objects below refer to an SNMP entity, and there may be several
SNMP entities residing on a managed node (for example, if the node is hosting
acting as a management station).
MIB-2
Object
Name
Type Access Description
udpLocalAddr
ess
IpAddress R The local IP address for this UDP listener. In
the case of a UDP listener which is willing to
accept datagrams for any IP interface
associated with the node, the value 0.0.0.0
is used.
udpLocalPort INTEGER (0..65535) R The local port number for this UDP listener.
MIB-2 Object
Name
Type Access Description
snmpInPkts Counter R The total number of Messages delivered to
the SNMP entity from the transport service.
snmpOutPkts Counter R The total number of SNMP Messages which
were passed from the SNMP protocol entity
to the transport service.
snmpInBadVersion
s
Counter R The total number of SNMP Messages which
were delivered to the SNMP protocol entity
and were for an unsupported SNMP version.
snmpInBadComm
unityNames
Counter R The total number of SNMP Messages
delivered to the SNMP protocol entity which
used a SNMP community name not known
to said entity.
snmpInBadComm
unityUses
Counter R The total number of SNMP Messages
delivered to the SNMP protocol entity which
represented an SNMP operation which was
not allowed by the SNMP community named
in the Message.