OpenView Storage Provisioner v1.1 - Release Notes

Storage Provisioner Issues
13OpenView Storage Provisioner Release Notes
The SMA Home page displays.
2. Choose Tools.
3. In the address box of your browser change the localhost setting to the TCP/IP
address of the SMA. For example, if the TCP/IP address of your SMA is
100.10.1.10 you enter it as follows:
http://100.10.1.10/tasks.asp?tab1=TabsTools
4. Click storage provisioner.
Storage Provisioner starts.
Adding a Local Host
Complete the following steps if your SAN has HSG array controllers.
Note: This description uses HSG Element Manager. On your system you may need to
substitute HSG Element Manager with the new name, Command View HSG.
1. Using a web browser, access the SMA and log in. The SMA home page
displays.
2. Enable Storage Provisioner to communicate with the HSG80 Array
Controller:
From the SMA home page, open Command View HSG:
3. Click Devices and then HSG Element Manager.
The HSG Element Manager page displays.