Smart Array 5300 Controller User Guide

Configuring an Array
7-28 Compaq Smart Array 5300 Controller User Guide
COMPAQ CONFIDENTIAL
Writer: John Turner File Name: h-ch7 configuring an array.doc
Codename: SilverHammer Part Number: 135606-004 Last Saved On: 7/22/02 10:58 AM
2. Press the Esc key to save the changes and return to the controller selection
screen.
3. Restart the system to apply the changes.
NOTE: Raw logical drives are invisible to the operating system. To make the new logical
drives available for data storage, format the logical drive using the instructions given in your
operating system documentation.
Manual Configuration
Figure 7-22: Main manual configuration screen
Highlight the controller, array, or logical drive that you want to configure, and then
press the Enter key. The menu options for that item are shown in the panel on the
right-hand side of the screen. Table 7-4 lists the menu options for each item in the
Logical Configuration View panel. If an option is not applicable in any particular
case, it is not displayed in the panel.