HP Bezel Replacement Instructions (590360-002, June 2013)

HP Bezel Replacement
Instructions
Abstract
This document details procedures for replacing failed bezels
on an HP disk enclosure.
© Copyright 2009, 2013 Hewlett-Packard Development Company, L.P.
Printed in the US
*590360-002*
HP Part Number: 590360-002
Published: June 2013
Edition: 2
About this document
• Illustrations in this document may show modules
or an enclosure that differ slightly from the devices
in your environment.
• For the latest product documentation, see the HP
website at http://www.hp.com/support/manuals.
Under the storage banner, navigate to the page
for your storage enclosure.
• Warranties for HP products and services are set
forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as constituting
an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained
herein. To obtain a copy of the warranty for this
product, see the warranty information website:
http://www.hp.com/go/storagewarranty.
Removing and installing bezels
Several bezels are included in this kit. Use the bezel
needed for your environment.
To remove a bezel, grasp the bezel firmly and pull
until the bezel separates from the chassis.
Page 1