9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

HP P4000 CLI|Return Codes|11
Result Value OS Status Description
ignored as it is not
applicable.
CliqUnexpected 0x80001001 128 An unexpected
error has occurred.
CliqXmlError 0x80001002 129 The XML given is
not well-formed.
CliqParameterFormat 0x80001003 130 The parameter
is not specified
correctly.
CliqParameterRepeat 0x80001004 131 A parameter is
repeated.
CliqMissingMethod 0x80001005 132 The command
method is missing.
CliqMissingParameter 0x80001006 133 One or more
expected
parameters are
missing.
CliqUnrecognizedCommand0x80001007 134 This command is
unrecognized.
CliqUnrecognizedParameter0x80001008 135 This parameter is
unrecognized.
CliqIncompatibleParameters0x80001009 136 Two or more
parameters
supplied are
incompatible with
each other.
CliqNotYetImplemented 0x8000100A 137 This is a legal
command - we just
haven't done it yet.
CliqNoMemory 0x8000100B 138 Out of memory.
CliqVolumeNotFound 0x8000100C 139 Could not find the
requested volume.
CliqVolumeInUse 0x8000100D 140 The requested
volume is in use.
CliqVolumeInitFailure 0x8000100E 141 Volume
initialization failed.
CliqUnrecognizedVolume 0x8000100F 142 The volume is an
unrecognized type.
CliqOperationFailed 0x80001010 143 General SAN/iQ
error - the operation
failed.
CliqCredentialsFailed 0x80001011 144 The supplied
credentials are
incorrect.
CliqInvalidParameter 0x80001012 145 Invalid parameter.