9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

HP P4000 CLI|Return Codes|13
Result Value OS Status Description
CliqFileError 0x80001022 161 General file error.
CliqMissingInitiator 0x80001023 162 No iSCSI initiator
found.
CliqInitiatorStopped 0x80001024 163 The iSCSI initiator
is not running.
CliqSanIqTooOld 0x80001025 164 The version of
SAN/iQ software
must be upgraded.
CliqDefaultAdmin 0x80001026 165 You cannot
delete, modify
permissions, or
remove the last user
from the default
administration
group.
CliqVssProviderNotInstalled0x80001027 166 The HP P4000
VSS Provider is not
installed.
CliqVssProviderNotRunning0x80001028 167 The HP P4000
VSS Provider is not
running.
CliqVolumeNoSessions 0x80001029 168 Cannot create
an application-
managed snapshot
because there
are no iSCSI
connections
associated with
this volume. To
create application-
managed
snapshots, there
must be at least
one application
server associated
with the volume
via an iSCSI
connection.The
volume must be
connected to a VSS-
enabled server.
CliqVolumeMultipleSessions0x8000102A 169 Cannot create
an application-
managed snapshot
because there is
more than one IQN
(iSCSI Qualified
Name) associated
with this volume. To
create application-