Manualshelf

9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

ManualsBrandsHP ManualsStorageHP P4300 G2 16TB MDL SAS Starter China SAN Solution
21222324252627282930
HP P4000 CLI|Commands|21
Example
cliq clearSnmpNotifyPolicy login=10.0.1.3 userName=admin
passWord=secret
cliq clearSnmpNotifyPolicy
clearSnmpServiceInfo
This command clears the SNMP Server Info.
Availability: Windows, SAN/iQ
Version: 9.0
Request Syntax
cliq clearSnmpServiceInfo login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
Example
cliq clearSnmpServiceInfo login=10.0.1.3 userName=admin
passWord=secret
cliq clearSnmpServiceInfo
clearVssVolumeFlags
This command resets snapshot flags in the vss volume.
Availability: Windows
Version: 8.5
Request Syntax
cliq clearVssVolumeFlags volumeName=
volumeName Required The name of the volume
Example
cliq clearVssVolumeFlags volumeName=x:
cloneSnapshot
This command creates one or more SmartClone volumes from a SAN/iQ snapshot. These SmartClone
volumes have all the functionality of normal volumes.
Availability: Windows, SAN/iQ