Manualshelf

9.5 HP P4000 SAN/iQ Command-Line Interface User Guide (AX696-96069, September 2011)

ManualsBrandsHP ManualsStorageHP P4300 G2 16TB MDL SAS Starter China SAN Solution
21222324252627282930
22|HP P4000 CLI|Commands
Version: 8.0
Request Syntax
cliq cloneSnapshot snapshotName= volumeName= login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
snapshotName Required The name of the remote snapshot
volumeName Required The name of the volume
Example
cliq cloneSnapshot snapshotName=Snapshot1
volumeName=MyClone1;MyClone2 login=10.0.1.2 userName=admin
passWord=secret
cliq cloneSnapshot snapshotName=Snapshot1
volumeName=MyClone1;MyClone2
configureRaid
This command reconfigures the RAID setting on a storage system.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq configureRaid configuration= login= userName= passWord=
login Required The IP address or DNS-resolvable names of one or more storage systems
userName Required The authentication user name for the storage system
passWord Required The password for the storage system
keyFile Required The encrypted key file (this is specified instead of the username and password
parameters)
configuration Required The RAID type to set. The possible RAID levels are reported in the getNsmInfo call.
Example
cliq configureRaid configuration="RAID10" login=10.0.1.2
userName=admin passWord=secret
cliq configureRaid configuration="RAID10" login=10.0.1.2
userName=admin passWord=secret
connectVolume
This command connects an already present array volume to an application server host.
Availability: Windows
Version: 8.0
Request Syntax